Olympus Preamplifier – Master Divine Line

/Olympus Preamplifier – Master Divine Line
Olympus Preamplifier – Master Divine Line2023-06-27T15:41:45+00:00

Technical Specifications

  • Full balanced quad mono with two separate PSUs

  • Analog Inputs: 3 pairs XLR, 2 pairs RCA

  • Analog Outputs: 2 pairs XLR (1 as standard and P-LINK)

  • Voltage gain: +8db (2)

  • Maximum input level: (+17dbu) 5,6Vrms XLR, (+11 dbu) 2,8Vrms RCA

  • Input Impedance balanced (XLR): 60 KΩ

  • Input Impedance single ended (RCA): 30 KΩ

  • Output Impedance : < 10 Ω

  • Frequency Response: (-3dB) 0.1Hz – 500kHz

  • THD + N: 0.0172% @ 1kHz

  • Signal to Noise: 119db

Olympus Preamplifier – Master Divine Line

A modern audio preamplifier should act as an interface between the music sources and the power amplifier, ideally matching impedances and provide a volume control functionality.

With Alexander from our Divine line being already one of the best solid state preamplifiers in the world, our work was not easy. We wanted to push the boundaries in our design and exceed our ultimate requirements such as extra low distortion, natural, uncoloured and dynamic sonic characteristics! A lot of development took place and the use of the latest generation components in critical areas allowed us to create Olympus…

Olympus is our NEW preamplifier in the Master Divine Series, quad-mono, true balanced design, ultimate channel separation (3 Chassis) and our newly improved sophisticated volume control design that ensures -minimal signal path- (only one resistor!). All of the above, combined with the latest generation components, zero-loss design techniques, and cost-no-object parts/materials, classify our Olympus to be a state of the art preamplifier! In compare with Divine Alexander, it is a step above with improvements in the design of our preamplifier’s analogue circuit, with NEW “ultimate” power supplies implemented externally in two different separated chassis (1/channel) and our new transformers with special core, isolated from the chassis and encapsulated. Olympus is the NEW “Ultimate preamplifier” from Pilium!

General Specifications

  • Display:  TFT 5′ 800×480 LED 16.7M

  • Power Consumption (Standby): 10.5W

  • Power Consumption (Operation): 17W

  • Dimensions (Preamp Unit): W480 x D490 x H212 (mm)

  • Dimensions (PSU Unit) x 2 : W235 x D490 x H162 (mm)

  • Net Weight (Preamp Unit): 52kg

  • Net Weight (PSU Unit): 19.5kg/Unit (39kg Total)

  • Shipping Weight: 110kg

This website uses cookies and third party services. Ok